Mimaki CF2-1215

Mimaki CF2-1215

Enable your multi-type-small-lot production with the CF2. 

The CF2 Series flat bed cutting plotter capable of cutting various kinds of media with high accuracy without dies. Out of a total of 30 kinds of line-up, you can choose the one best suited for your needs. By cutting the printed media, you may produce high value-added products on demand required. Begin multi-type small-lot production with unprecedented high quality.

CF2-0912**	CF2-1215**	CF2-1218**
Effective plotting area	X (Sensor model)	1,170mm(46.1")	1,470mm(57.9")	1,770mm(69.7")
	X (No sensor model)	1,200mm(47.2")	1,500mm(59.1")	1,800mm(70.9")
	Y	900mm(35.4")	1,200mm(47.2")
Motorization		X,Y,Z,θ 4 axes DC software servo
Maximum plotting speed		50cm(19.7") / s
Maximum acceleration		0.5G
Mechanical resolution		X:0.00234mm(0.00009") Y:0.003125mm(0.0001") θ:0.05625
Command resolution		0.025mm(0.001") / 0.01mm(0.0004") (changeable from operation panel)
Static accuracy *1	Repetition accuracy	±0.1mm(0.004")
	Distance accuracy	±0.1mm(0.004") or ±0.1% whichever is greater
	Origin repetition accuracy	±0.1mm(0.004")
Maximum thickness of set work		T / TD:25mm(1") RT / RC:20mm(0.8")
Work fixation		Air suction by a blower
Receiver buffer size		1MB
Command		MGL-IIc3(Support MGL-IIc) *2
Interface		RS-232C
Dimension	Width	1,760mm(69.3") or less	2060mm(81.1") or less	2360mm(92.9") or less
	Depth	1,600mm(63.0") or less	1900mm(74.8") or less
	Height	1,100mm(43.3") or less
Weight		140kg(308lbs)	165kg(364lbs)	180kg(397lbs)
Operation environment		Temperaturet : 5-40ºC Humidityt : 35-75%(Rh)No condensation
Power requirement		Main Unitt : 50/60Hz AC100/120/220/240V(tap changing) Blowert : Stated separately
Power consumption		Main Unit : 300VA Blowert : Stated separately

Materials that can be processed★：Possible to cut with standard accessories 

●：Possible to cut with the use of optional items

	T	TF	RT	TD	RC
Corrugated fiberboard(E to B corrugation)*				★	★
Corrugated fiberboard(AB corrugation)*					★
Coated board for packaging*				★	★
Vinyl chloride for clear package*				★	★
Plastic corrugated fiberboard				★	★
Vinyl chloride sheet for signboard	★	★	★	★	★
Soft vinyl chloride(0.5 to 10mm)	●	●
Reflecting sheet	★	★	★	★	★
Sand-blast rubber	★	★	★	★	★
Industrial sheet rubber(3mm or less)	★	★	★	★	★
Industrial sheet rubber(0.5 to 10 mm)	●	●
Pattern Happort	★	★	★	★	★
Teflon(1.0 to 5.0mm)		★		★	★
Resin belt. (5.0mm or less)	★	★
Various foam(20mm or less)			★

Note) As the property of the media may vary depending on the material manufacturers, the above data is just a guide. Make sure to perform your own testing.
Note) *shows material to which drawing of the ruled line is possible.

 Model

CF2-0912T	Effective cutting area: 900 x 1,200 mm (35.4 x 47.2")
CF2-0912TF	Effective cutting area: 900 x 1,200 mm (35.4 x 47.2")
CF2-0912RT	Effective cutting area: 900 x 1,200 mm (35.4 x 47.2")
CF2-0912TD	Effective cutting area: 900 x 1,200 mm (35.4 x 47.2")
CF2-0912RC	Effective cutting area: 900 x 1,200 mm (35.4 x 47.2")
CF2-1215T	Effective cutting area: 1,200 x 1,500 mm (47.2 x 59.1")
CF2-1215TF	Effective cutting area: 1,200 x 1,500 mm (47.2 x 59.1")
CF2-1215RT	Effective cutting area: 1,200 x 1,500 mm (47.2 x 59.1")
CF2-1215TD	Effective cutting area: 1,200 x 1,500 mm (47.2 x 59.1")
CF2-1215RC	Effective cutting area: 1,200 x 1,500 mm (47.2 x 59.1")
CF2-1218T	Effective cutting area: 1,200 x 1,800 mm (47.2 x 70.9")
CF2-1218TF	Effective cutting area: 1,200 x 1,800 mm (47.2 x 70.9")
CF2-1218RT	Effective cutting area: 1,200 x 1,800 mm (47.2 x 70.9")
CF2-1218TD	Effective cutting area: 1,200 x 1,800 mm (47.2 x 70.9")
CF2-1218RC	Effective cutting area: 1,200 x 1,800 mm (47.2 x 70.9")