MIMAKI DS 1600 TEXTILE PRINTER (64-INCH)
Your shopping cart is empty!
Product Description
MIMAKI DS 1600 TEXTILE PRINTER (64-INCH)
Introducing a high resolution system that is more ecologically friendly and provides more efficient operation than traditional sublimation transfer systems. The DS-1600 Textile Printer is a 64-inch “direct to dye sublimation” printer that doesn’t require transfer medium. A new Mimaki inkset formulation creates a robust color gamut when applied directly to polyester based roll materials.
Sharp, high-quality print
Direct printing provides finer lines and sharper edges than traditional transfer systems.
Environmental-friendly
No need to use transfer paper.
Reduced cost
This system requires no transfer paper or liner paper, so running costs are much lower than the costs of traditional transfer systems.
Improved operational efficiency
The system avoids cockling of printed transfer paper and mistakes made by wrinkling transfer paper when transferring the ink onto fabric.
Equipped with media take-up device and media feeder with a dancer roller
The tension bar moves up and down to adjust proper feeding. Suitable for continuous operation.
Ink tray
In order to prevent ink that has penetrated the fabric from marking other fabrics, a tray is provided.
High-speed print heads
The head configuration is an array of two staggered print heads. 1-way (single ink set) for fast printing and 2-way (dual ink set) for multipurpose printing are available. In addtion, both print modes can utilize either 4-color high speed printing or 6-color high quality printing.
Fabric supply mechanism
In addition to the drive roller and friction roller, the take-up unit and feeding unit with a dancer roller cause tension in the fabric to prevent it from wrinkling. The fabric retainer holds both edges of the fabric, preventing it from touching the print head.
MIMAKI DS 1600 TEXTILE PRINTER (64-INCH)
Introducing a high resolution system that is more ecologically friendly and provides more efficient operation than traditional sublimation transfer systems. The DS-1600 Textile Printer is a 64-inch “direct to dye sublimation” printer that doesn’t require transfer medium. A new Mimaki inkset formulation creates a robust color gamut when applied directly to polyester based roll materials.
Sharp, high-quality print
Direct printing provides finer lines and sharper edges than traditional transfer systems.
Environmental-friendly
No need to use transfer paper.
Reduced cost
This system requires no transfer paper or liner paper, so running costs are much lower than the costs of traditional transfer systems.
Improved operational efficiency
The system avoids cockling of printed transfer paper and mistakes made by wrinkling transfer paper when transferring the ink onto fabric.
Equipped with media take-up device and media feeder with a dancer roller
The tension bar moves up and down to adjust proper feeding. Suitable for continuous operation.
Ink tray
In order to prevent ink that has penetrated the fabric from marking other fabrics, a tray is provided.
High-speed print heads
The head configuration is an array of two staggered print heads. 1-way (single ink set) for fast printing and 2-way (dual ink set) for multipurpose printing are available. In addtion, both print modes can utilize either 4-color high speed printing or 6-color high quality printing.
Fabric supply mechanism
In addition to the drive roller and friction roller, the take-up unit and feeding unit with a dancer roller cause tension in the fabric to prevent it from wrinkling. The fabric retainer holds both edges of the fabric, preventing it from touching the print head.
Specifications
Item DS-1600 DS-1800 Print head Method Piezo-electric drop-on demand Nozzle Configuration Eight heads (4 x 2 lines, stagger arrangement) Resolution 360, 540, 720 dpi Maximum printing width 1,620mm(63.7") 1850mm (72.8") Head height adjustment 1.2mm (0.04") to 10mm (0.39") Printing 4-Colours 6-Colours Nozzle 360 nozzels per colour 180 nozzles per colour Print mode
(1*) 6-colour printing 360 x 360 dpi: 2/4/8 pass Bi/Uni directional 360 x 540 dpi: 3/6/12 pass Bi/Uni directional 360 x 720 dpi: 4/8/16 pass Bi/Uni directional 720 x 720 dpi: 4/8/16 pass Bi/Uni directional 4-colour printing 360 x 360 dpi: 1/2/4 pass Bi/Uni directional 360 x 540 dpi: 3/6/12 pass Bi/Uni directional 360 x 720 dpi: 2/4/8 pass Bi/Uni directional 720 x 720 dpi: 2/4/8 pass Bi/Uni directional Ink type Dye Sublimation C, M, Y, K, Lc, Lm Aqueous Pigment C, M, Y, K Ink Volume
(2*) 6 colour print 1-way: 220cc x 2/colour, 2-way: 220cc x 1/colour 4 colour print 1-way: 220cc x 4/colour, 2-way: 220cc x 2/colour Media Type Polyester / Cotton (3*) Width 200mm (7.8") - 1650mm (64.9") 200mm (7.8") - 1900mm (74.8") Thickness Less than 7mm (0.27") Outside diameter Less than Ø250mm (9.84") Roll weight Less than 30kg (66lbs) Roll inside diameter 1.5" - 3" Printing surface Printing is possible on either sides Roll end treatment Light adhesive tape is used to allow media to be removed Margin (roll fabric) 10mm (0.39") ±0.5mm (0.01"), left and right side Interface IEEE-1284 / IEEE-1394 Command MRL-1E (ESC/PV.1 base) Mimaki original command Power requirement AC100V to 240V ±10%, (auto voltage) 50/60Hz±1Hz Power consumption Less than 500W Operational Environment Temperature: 15°C (55°F) to 30°C (86°F) Humidity: 35% to 65%Rh (no condensation) Dimentions Width 2750mm (108.3") 3040mm (119.7") Depth 940mm (37.0") Height 1350mm (53.2") Weight 230Kg(507lbs) 250kg (551lbs)
| Item | DS-1600 | DS-1800 | |
| Print head | Method | Piezo-electric drop-on demand | |
| Nozzle Configuration | Eight heads (4 x 2 lines, stagger arrangement) | ||
| Resolution | 360, 540, 720 dpi | ||
| Maximum printing width | 1,620mm(63.7") | 1850mm (72.8") | |
| Head height adjustment | 1.2mm (0.04") to 10mm (0.39") | ||
| Printing | 4-Colours | 6-Colours | |
| Nozzle | 360 nozzels per colour | 180 nozzles per colour | |
| Print mode (1*) | 6-colour printing | 360 x 360 dpi: 2/4/8 pass Bi/Uni directional | |
| 360 x 540 dpi: 3/6/12 pass Bi/Uni directional | |||
| 360 x 720 dpi: 4/8/16 pass Bi/Uni directional | |||
| 720 x 720 dpi: 4/8/16 pass Bi/Uni directional | |||
| 4-colour printing | 360 x 360 dpi: 1/2/4 pass Bi/Uni directional | ||
| 360 x 540 dpi: 3/6/12 pass Bi/Uni directional | |||
| 360 x 720 dpi: 2/4/8 pass Bi/Uni directional | |||
| 720 x 720 dpi: 2/4/8 pass Bi/Uni directional | |||
| Ink type | Dye Sublimation | C, M, Y, K, Lc, Lm | |
| Aqueous Pigment | C, M, Y, K | ||
| Ink Volume (2*) | 6 colour print 1-way: 220cc x 2/colour, 2-way: 220cc x 1/colour | ||
| 4 colour print 1-way: 220cc x 4/colour, 2-way: 220cc x 2/colour | |||
| Media | Type | Polyester / Cotton (3*) | |
| Width | 200mm (7.8") - 1650mm (64.9") | 200mm (7.8") - 1900mm (74.8") | |
| Thickness | Less than 7mm (0.27") | ||
| Outside diameter | Less than Ø250mm (9.84") | ||
| Roll weight | Less than 30kg (66lbs) | ||
| Roll inside diameter | 1.5" - 3" | ||
| Printing surface | Printing is possible on either sides | ||
| Roll end treatment | Light adhesive tape is used to allow media to be removed | ||
| Margin (roll fabric) | 10mm (0.39") ±0.5mm (0.01"), left and right side | ||
| Interface | IEEE-1284 / IEEE-1394 | ||
| Command | MRL-1E (ESC/PV.1 base) Mimaki original command | ||
| Power requirement | AC100V to 240V ±10%, (auto voltage) 50/60Hz±1Hz | ||
| Power consumption | Less than 500W | ||
| Operational Environment | Temperature: 15°C (55°F) to 30°C (86°F) Humidity: 35% to 65%Rh (no condensation) | ||
| Dimentions | Width | 2750mm (108.3") | 3040mm (119.7") |
| Depth | 940mm (37.0") | ||
| Height | 1350mm (53.2") | ||
| Weight | 230Kg(507lbs) | 250kg (551lbs) | |