Mimaki UJF-3042FX UJF-3042FX
Head		On-demand Piezo head
Print resolution		720 × 600 dpi, 1,440 × 1200 dpi
Ink		Hard UV curable ink : LH-100, LF-140, LF-200
Ink capacity		220 ml ink cartridge / 600 ml ink pack
Inkjet primer		PR-100 (220 ml ink cartridge / 600 ml ink container)
Maximum print width		Width : 300 mm (11.8 "), Length : 420 mm (16.5 ")
Media	Width	Width : 364 mm (14.3 "), Length : 463 mm (18.2 ")
	Thickness	Max. 50 mm (1.97 ")
	Weight	Less than 5 kg (11 lbs)
	Set device	Air suction by vacuum
UV device		Equipped with UV Light Emitting Diodes
Interface		USB 2.0
Applicable standard		VCCI class A, FCC class A, UL, RoHS Directive, CE Marking
Power specifications		AC 100 - 240 V (Automated voltage conversion)
Power consumption		Less than 350 VA
Operational environment	Temperature	20 - 35 °C (68 - 95 °F)
	Humidity	35 - 65 % Rh
	Dust	Equivalent to normal office level
Weight		Approx. 113kg (249.1 lbs.)
Dimensions (W x D x H)		1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ")

・Inks would not be cured when printing speed is faster than that of draft mode.

All trademarks or registered trademarks are the property of their respective owners.
Specifications are subject to change without notice.
Some of the screens and printing samples in this website are artificial renderings.
Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Mimaki UJF-3042FX

Mimaki UJF-3042FX UJF-3042FX
Head		On-demand Piezo head
Print resolution		720 × 600 dpi, 1,440 × 1200 dpi
Ink		Hard UV curable ink : LH-100, LF-140, LF-200
Ink capacity		220 ml ink cartridge / 600 ml ink pack
Inkjet primer		PR-100 (220 ml ink cartridge / 600 ml ink container)
Maximum print width		Width : 300 mm (11.8 "), Length : 420 mm (16.5 ")
Media	Width	Width : 364 mm (14.3 "), Length : 463 mm (18.2 ")
	Thickness	Max. 50 mm (1.97 ")
	Weight	Less than 5 kg (11 lbs)
	Set device	Air suction by vacuum
UV device		Equipped with UV Light Emitting Diodes
Interface		USB 2.0
Applicable standard		VCCI class A, FCC class A, UL, RoHS Directive, CE Marking
Power specifications		AC 100 - 240 V (Automated voltage conversion)
Power consumption		Less than 350 VA
Operational environment	Temperature	20 - 35 °C (68 - 95 °F)
	Humidity	35 - 65 % Rh
	Dust	Equivalent to normal office level
Weight		Approx. 113kg (249.1 lbs.)
Dimensions (W x D x H)		1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ")

・Inks would not be cured when printing speed is faster than that of draft mode.

All trademarks or registered trademarks are the property of their respective owners.
Specifications are subject to change without notice.
Some of the screens and printing samples in this website are artificial renderings.
Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.