| CG-75FXII | CG-130FXII | CG-160FXII | ||
|---|---|---|---|---|
| Acceptable sheet width | 90mm~1,040mm (3.54"~40.9") | 90mm~1,580mm (3.54"~62.0") | 90mm~1,880mm (3.54”~74”) | |
| Acceptable roll sheet | Outer less than φ200mm , Roll weight less than 18kg | Outer less than φ200mm Roll weight less than 22kg | ||
| Effective cutting area*1 | 760mm x 51m(29.9" x 167') | 1,300mm x 51m(51.2" x 167') | 1,600mm×51m(62.9”×167’) | |
| Maximum auto cutting width*2 | 870mm (34.2”) | 1,425mm (56.1”) | 1,720mm (67.7”) | |
| Maximum cutting speed | 100cm/s (39.3"/s) | |||
| Maximum moving speed | 140cm/s (55"/s) | |||
| Adjustable speed range*3 | 1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment) | |||
| Mechanical resolution | 5µm(0.0002") | |||
| Command resolution | 25µm or 10µm(0.001" or 0.0004")-MGL-IIc | |||
| Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) | |||
| Tekanan pen | 400g | |||
| Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | ||
| Pouncing | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | |||
| Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||
| Acceptable sheet*4 | Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet | |||
| Acceptable sheet for pouncing*5 | Paper thickness: 0.06~0.13mm (0.0024"~0.005") | |||
| Applicable tools*6 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool | |||
| Type of command | MGL-IIc | |||
| Interface | RS-232C,USB | |||
| Receiver buffer size | 30MB Standard (20MB when in sorting) | |||
| Operational | Temperature | 5~35°C (41~95°F) | ||
| Humidity | 35~75%(Rh) Non-condensation | |||
| Power requirement | AC100V~240V | |||
| Power consumption | 145VA or less | |||
| Dimensions (WxDxH) | 1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9") | 1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9") | 2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9") | |
| Weight (with stands) | 50kg(110 lbs.) | 60kg(132 lbs.) | 69kg(152 lbs.) | |
*1: Maximum sheet feeding length differs depending on the software.
*2:Sheet width to cut off from the roll.
*3:Restricted sheet width.
*4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:Pouncing tool intended specifically for pouncing shall be used.
*6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of the respective owners.
Model
| CG-75FXII | Effective cut width: 760 mm (29.9") |
|---|---|
| CG-130FXII | Effective cut width: 1,300 mm (51.2") |
| CG-160FXII | Effective cut width: 1,600 mm (63.0") |
Mimaki CG-160FXII
- Product Code: MMK25759
| CG-75FXII | CG-130FXII | CG-160FXII | ||
|---|---|---|---|---|
| Acceptable sheet width | 90mm~1,040mm (3.54"~40.9") | 90mm~1,580mm (3.54"~62.0") | 90mm~1,880mm (3.54”~74”) | |
| Acceptable roll sheet | Outer less than φ200mm , Roll weight less than 18kg | Outer less than φ200mm Roll weight less than 22kg | ||
| Effective cutting area*1 | 760mm x 51m(29.9" x 167') | 1,300mm x 51m(51.2" x 167') | 1,600mm×51m(62.9”×167’) | |
| Maximum auto cutting width*2 | 870mm (34.2”) | 1,425mm (56.1”) | 1,720mm (67.7”) | |
| Maximum cutting speed | 100cm/s (39.3"/s) | |||
| Maximum moving speed | 140cm/s (55"/s) | |||
| Adjustable speed range*3 | 1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment) | |||
| Mechanical resolution | 5µm(0.0002") | |||
| Command resolution | 25µm or 10µm(0.001" or 0.0004")-MGL-IIc | |||
| Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) | |||
| Tekanan pen | 400g | |||
| Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | ||
| Pouncing | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | |||
| Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||
| Acceptable sheet*4 | Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet | |||
| Acceptable sheet for pouncing*5 | Paper thickness: 0.06~0.13mm (0.0024"~0.005") | |||
| Applicable tools*6 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool | |||
| Type of command | MGL-IIc | |||
| Interface | RS-232C,USB | |||
| Receiver buffer size | 30MB Standard (20MB when in sorting) | |||
| Operational | Temperature | 5~35°C (41~95°F) | ||
| Humidity | 35~75%(Rh) Non-condensation | |||
| Power requirement | AC100V~240V | |||
| Power consumption | 145VA or less | |||
| Dimensions (WxDxH) | 1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9") | 1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9") | 2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9") | |
| Weight (with stands) | 50kg(110 lbs.) | 60kg(132 lbs.) | 69kg(152 lbs.) | |
*1: Maximum sheet feeding length differs depending on the software.
*2:Sheet width to cut off from the roll.
*3:Restricted sheet width.
*4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:Pouncing tool intended specifically for pouncing shall be used.
*6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of the respective owners.
Model
| CG-75FXII | Effective cut width: 760 mm (29.9") |
|---|---|
| CG-130FXII | Effective cut width: 1,300 mm (51.2") |
| CG-160FXII | Effective cut width: 1,600 mm (63.0") |
- Brand: MIMAKI
- Product Code: MMK25759
- Availability: In Stock
$3,915.00
New
New
New
New
New
New
New
New
New